Skip to content
Red Eagle Fire Protection

04Fire Extinguisher Service

Extinguishers serviced and hydro tested.

Servicing, replacement and hydrostatic testing for the portable extinguishers in your building, from the Class K unit at the cook line to the multipurpose units by the doors.

Service
04 / 05
System coverage
Fire extinguishers
KA01 Gauge · Detail A02 Pin & seal03 Hose & nozzle04 Service tag05 Class K06 Bracket

Fig. 04 — Class K extinguisher and service tag. Not to scale.

04.1Overview

A grease fire needs the right extinguisher.

Cooking-oil and grease fires behave differently from paper or wood fires, and they call for a different extinguisher. Class K units are made for the cook line. Multipurpose units, usually rated ABC, cover the dining room, storage, offices and back-of-house. Most kitchens have both.

An extinguisher can look fine on the wall and still not be ready. Pressure leaks off, pins and seals go missing, hoses crack, and units that were used get hung back up. Servicing catches those problems. Over time, cylinders also need hydrostatic testing, a pressure test of the shell itself, at intervals set by the extinguisher type.

We service extinguishers, replace units that are damaged, expired or fail testing, and handle hydrostatic testing. How often each unit needs service or testing depends on its type and on your local fire authority, and we'll tell you what applies to the units you have.

Extinguisher service at a glanceSpec 04

Cook line
Class K units for cooking-oil and grease fires
Building
Multipurpose units for dining, storage, offices and back-of-house
Service
Servicing, replacement and hydrostatic testing
Intervals
Set by extinguisher type and your local fire authority

Placement

Where extinguishers go in a commercial kitchen.

  • Class KAt the cook line, for cooking-oil and grease fires
  • MultipurposeNear exits, storage, offices and the dining room

A typical layout, for illustration. The type, number and location of units in your building are set by your local fire authority.

Cook line · hoodKitchenStorageOfficeDiningKABCABCABCABC
Fig. 04.C — Typical placement, plan view

04.2Common problems

Signs an extinguisher needs service

Most of these show up in a ten-second look at the unit.

  1. P–01

    Gauge needle out of the green

    On stored-pressure units, a needle in the recharge or overcharged zone means the extinguisher may not discharge the way it should.

  2. P–02

    Missing or out-of-date tag

    No tag, an unreadable tag or a last service date that's too far back means the unit is due.

  3. P–03

    Used, even briefly

    A unit that was discharged, even for a second, needs service or replacement before it goes back on the wall.

  4. P–04

    Due for a hydro test

    Cylinders need hydrostatic testing at intervals set by their type. The unit's test date shows when it's coming due.

  5. P–05

    Damaged hose, pin or seal

    A cracked hose, a missing pull pin or a broken tamper seal is reason to take a unit out of service until it's checked.

  6. P–06

    Wrong class at the cook line

    A multipurpose unit next to the fryers is not a stand-in for a Class K extinguisher made for cooking-oil fires.

04.3What's included

What extinguisher service covers

For the portable extinguishers in your kitchen and the rest of the building.

  • 04.01

    Servicing

    Each unit checked for pressure, condition, pin and seal, hose and nozzle, and serviced as needed, including recharging after use.

  • 04.02

    Service tags

    Every serviced unit tagged with the date and the work done.

  • 04.03

    Hydrostatic testing

    Cylinders pressure-tested at the intervals their type calls for.

  • 04.04

    Replacement

    Damaged, expired and out-of-service units, and units that fail testing, replaced.

  • 04.05

    Class K at the line

    Replacement Class K units for the cook line, and multipurpose units for the rest of the building.

  • 04.06

    Scheduled around service

    Visits set for a time that keeps the work out of the way of your service.

04.4Why it matters

Why it matters

Right class, right place.

  • 01

    Units charged and intact

    Regular service catches lost pressure, missing pins and cracked hoses before anyone has to reach for the extinguisher.

  • 02

    The right class in the right place

    Class K at the cook line, multipurpose units elsewhere.

  • 03

    A clear service record

    Tags on every serviced unit show when it was last maintained, for your records and for inspections.

  • 04

    Hydro testing handled

    Cylinders that come due for hydrostatic testing are tested or replaced instead of staying on the wall.

04.5Process

How a service visit runs

Every unit found, checked, serviced and tagged.

  1. Step 01

    Walk the building

    We locate every extinguisher, from the cook line to the dining room, storage and offices.

  2. Step 02

    Inspect each unit

    Pressure, pin and seal, hose and nozzle, physical condition, the existing tag and the hydro test date.

  3. Step 03

    Service, test or replace

    Units are serviced, hydro tested when due, or replaced. Anything that can't go back in service comes off the wall.

  4. Step 04

    Tag

    Each serviced unit gets an updated tag showing the date and the work done.

  5. Step 05

    Recommend

    We point out gaps, like a missing Class K at the line or a unit that's hard to reach.

04.6Questions

Extinguisher questions.

Straight answers to what owners and managers ask us most. Don't see yours? Call (818) 457-7828.

Class K extinguishers are made for fires involving cooking oils and fats, the kind that start at fryers and on the cook line. Kitchens that cook with oil generally keep one near the line, with multipurpose units elsewhere in the building. Your local fire authority sets the specific requirements, and we'll tell you what applies to your kitchen.

Talk to the team

Tag Expired?Hydro Due?

Tell us roughly how many units you have and where. We'll service and tag them, test what's due and replace what can't go back on the wall.

Call direct

(818) 457-7828

Open daily · 8 AM – 9 PM

Call nowRequest an Inspection